Diaphram Valve
Standard
Design BS5156:1985, R-01
Face to Face: DIN3202-F1,BS5156,R-01
Testing: BS6755 Part1
Medium: Water, oil, acids, slurry, air....
Products Range
| Type Connection | Flanged, Screwed, Weld |
| Size | From 8 to 350mm |
| Pressure range | From 4 to 16 Bar |
| Body material | Cast iron, Ductile iron, Cast steel, Stailess steel, Alloy 20... |
Low initial cost
Simple design and low manufacturing complexity provide your application with a low cost, low maintenance, high performance solution.
Superior performance.
“Bubble-tight” shutoff. Individually tested to provide a total seal to ANSI Class VI Standards.
Trouble-free operation.
A bonnet design, free of packing and glands, removes the need for periodic adjustment and replacement.
Excellent throttling characteristics.
Reliable flow regulation between 15% to 85% of rated capacity.
Easy maintenance.
Diaphragm replacement can be performed with the valve “in-line” - reducing plant downtime and maintenance costs.
Clean Design.
The body contains no internal cavities or crevices that can trap fluids.
Please contact us for technical sheet and quotation !
+86 138 6861 8624
